Skip to main content

Flush Mount Curtain Rod Brackets

Brushed Nickel · Set of 2 · 3 in From the Wall

Short projection brackets that keep a 3/4- to 1-inch rod about 3 inches from the wall, so the curtain hangs close to the window and the rod doesn’t stick out into the room. Rated 5 lb, for light curtains. They mount on the ceiling too. Rod not included.

Holds 5 lbweight capacity
3 infrom the wall
Set of 2brackets
3/4 in to 1 inrod diameter
All specifications
Color:BlackBrushed Nickel
Pack:2 brackets3 brackets

$19.99

Buying for a project or a store? Trade pricing from one master carton

What is IN THE BOX

Drywall Anchor x 6

Concrete Anchor x 6

Hex Key x 1

Concrete Anchor x 6

Concrete Anchor x 6

Concrete Anchor x 6

Concrete Anchor x 6

    Brushed nickel short projection curtain rod bracket holding a rod close to the wall
    A rod held about 3 inches from the wall, close to the window
    • Holds the rod close to the wall

      The curtain hangs near the glass instead of out in the room.

      How close
    • A short 3-inch projection

      Small brackets for hallways, narrow rooms and windows next to a door.

      Where it fits
    • Fits 3/4 to 1 inch rods

      Slim 3/4-inch and standard 1-inch rods both fit.

      Check your blinds first

    Flush Mount Curtain Rod Brackets: How Close the Rod Sits

    “Flush mount” here means a short projection, not a rod touching the wall: the curtain needs a little room to slide. These brackets hold the rod about 3 inches from the wall. A rod that close gives you:

    • less light at the edges, because the gap between curtain and wall is small;
    • less in the way in a narrow hallway or beside a door;
    • a neater line on a small window, where a deep bracket looks like a shelf bracket.

    Fits your window?

    5 lb · 3 in from the wall. Two brackets and installation kits included.

    Where Short Projection Brackets Work

    • Hallway and stair windows, where people pass close to the wall.
    • Windows beside a door that swings near the frame.
    • Small kitchen and bathroom windows over a sink or counter.
    • Inside a window recess: screw the brackets up into the top of the opening.
    Close to wall curtain rod brackets on a narrow hallway window
    A slim rod on two short brackets above a narrow hallway window.

    Small windows in tight spaces

    In a hallway, a deep bracket is something you brush with your shoulder. A 3-inch bracket keeps the rod tight to the wall and the curtain out of the walkway. A short white curtain stays well within the 5 lb rating.

    When 3 Inches Isn’t Enough: Blinds and Trim

    Measure from the wall to the front of your blinds or trim and add 1 to 2 inches. If the total is over 3 inches, choose a deeper bracket:

    Brushed Nickel Close to the Wall

    Brushed nickel is a soft satin silver. On a white or gray wall, it reads as quiet hardware. It matches nickel door handles, hinges and faucets. Gray, white, blue and pastel curtains look calm under it, which suits transitional and coastal rooms where black metal feels heavy. The brushed texture also hides fingerprints better than polished chrome.

    Brushed nickel low profile curtain rod bracket with a 1 inch rod on a white wall
    A brushed nickel bracket holding a 1-inch rod on a white wall.

    Match the metal you already see

    On a small bracket, the finish matters more than the shape. Match it to the door hardware, switch plate or faucet near the window. Two finishes that match look planned.

    Specifications and What’s in the Box

    3 inrod center

    Key specifications

    Bracket Projection
    3 in (low profile)
    Fits Rod Diameter
    3/4 in to 1 in rods
    Pack Size
    Set of 2
    Weight Capacity
    5 lb
    Mounting Type
    Ceiling or Wall
    Material
    Aluminum
    Color
    Brushed Nickel

    Product details

    Product Type
    Ceiling Curtain Rod Brackets
    Brand
    A Key Tech
    Model Number
    Ceiling CRB 28
    UPC
    676525518230
    Amazon ASIN
    B0CY9SWW1Y

    What’s in the box

    No rod in the box.

    How to Install Close to Wall Curtain Rod Brackets

    You need a drill, a screwdriver, a level, a tape measure and a pencil.

    1. 1Mark the height
    2. 2Level the marks
    3. 3Set the anchors
    4. 4Screw the brackets on
    5. 5Hang the curtain
    1. left · right4–6 inabove
      Step 1 of 5

      Mark the height. Mark both brackets above the frame, or right under the ceiling for a taller look.

    2. left · right4–6 inabove
      Step 2 of 5

      Level the marks. A rod that runs downhill shows at this distance from the wall.

    3. drywall3/16 in bitanchor
      Step 3 of 5

      Set the anchors. Use a stud where one lines up, anchors elsewhere.

    4. 2 screws in the slots, level, then the 3rd
      Step 4 of 5

      Screw the brackets on. Tighten until the base sits flat.

    5. Step 5 of 5

      Hang the curtain. Slide it onto the rod and set the rod in both brackets.

    Installing a brushed nickel flush mount curtain rod bracket above window trim
    Screwing a short brushed nickel bracket to the wall above the window trim.

    Check the trim before you drill

    Hold the rod where it will sit and look along it. If it touches the trim, raise the brackets or pick a deeper bracket.

    Short Projection vs Over-Blinds vs Heavy Duty Brackets

    These bracketsFlush Mount Curtain Rod Brackets, 3 Inch Short Projection, Wall or Ceiling, Brushed Nickel, Set of 2

    3-Inch Close to Wall

    Holds
    5 lb
    Projection
    3 in
    Fits rods
    3/4 in to 1 in rods
    Mount
    Ceiling or Wall

    5-Inch Over Blinds

    Holds
    —
    Projection
    5 in
    Fits rods
    3/4 in to 1 in rods
    Mount
    Wall

    6-Inch Heavy Duty

    Holds
    25 lb per bracket
    Projection
    Up to 6 in
    Fits rods
    1 in
    Mount
    Wall

    Wholesale and Bulk Orders

    Trade pricing for interior designers, contractors, property managers, hospitality suppliers and stores.

    Install-ready: two brackets and installation kits included.

    Or call +1 267 986 1426, 9 AM–6 PM Eastern.

    • 30–50 unitsMinimum per finish: one master carton, by model
    • 20%+ offRetail price, better with volume
    • 1 business dayIn-stock orders ship from Pennsylvania
    • SamplesCheck the finish and build first

    FAQ

    Distance from the wall, blinds, recesses and curtain types.

    How close to the wall does the rod sit?

    About 3 inches. That keeps the curtain near the glass and leaves room for the fabric to slide. The distance is fixed: the brackets don’t adjust.

    Will short projection brackets clear my blinds?

    Only if the blinds stick out very little. Measure to the front of the headrail and add 1 to 2 inches. Over 3 inches, use 5-inch or 6-inch brackets.

    Can I mount them inside a window frame?

    Yes. Screw them up into the top of the recess, as on a ceiling. The curtain then hangs right in front of the glass.

    What curtains work on close to wall brackets?

    Light ones: sheers, café curtains, unlined cotton or linen. The rating is 5 lb.

    Will grommet curtains fit this close to the wall?

    Yes, but grommet folds swing toward the wall too, so the back folds may touch it. Rings or clip rings hang straight below the rod and avoid that.

    Can I buy these brackets in bulk?

    Yes. Trade pricing starts at one master carton per finish, 30 or 50 units depending on the model, with discounts from 20% off retail that grow with volume. In-stock orders ship from our Pennsylvania warehouse within one business day. See partner pricing or email [email protected].

    Review