Skip to main content

Over Blinds Curtain Rod Brackets, 5 Inch

Black Aluminum · Set of 2

These black aluminum brackets hold your curtain rod 5 inches from the wall, so the curtain hangs in front of horizontal blinds instead of rubbing them. They fit 3/4 to 1 inch rods. Two brackets and installation kits are in the box; the rod is sold separately.

5 infrom the wall
Set of 2brackets
3/4 in to 1 inrod diameter
Wallmount
All specifications
Color:BlackBrushed Nickel

$19.99

Buying for a project or a store? Trade pricing from one master carton

What is IN THE BOX

Drywall Anchor x 6

Concrete Anchor x 6

Screw x 6

Hex Key x 1

Screw x 6

Screw x 6

Screw x 6

Screw x 6

    Black curtain rod bracket holding the rod 5 inches out, in front of horizontal blinds
    The curtain hangs in front of the blinds, not on them.
    • Clears horizontal blinds

      The rod sits 5 inches out from the wall, so the curtain falls in front of the headrail and the blinds still tilt and lift.

      Check your blinds
    • Aluminum, not plastic

      A fixed metal arm with no sliding section to set or drift.

      About the metal
    • Fits 3/4 to 1 inch rods

      Use the rod you already have or a new one in that range.

      See specs

    Will These Brackets Clear Your Blinds?

    On short brackets, a curtain lands on the blinds’ headrail and catches the slats. Over blinds curtain rod brackets hold the rod farther out, so the curtain hangs in front.

    Measure from the wall to the front of the headrail or valance, whichever sticks out more. Add 1 to 2 inches of clearance. If the total is 5 inches or less, these brackets clear your blinds.

    WALL
    Blinds stick out Needed with 1.5 in clearance 5-inch brackets
    2 in 3.5 in Clear
    3 in 4.5 in Clear
    3.5 in 5 in Clear, no room to spare
    4 in 5.5 in Too short

    Outside-mount blinds and deep valances need the most room. Need more than 5 inches? The 6-inch heavy duty curtain rod brackets adjust up to 6 inches from the wall.

    Fits your window?

    5 in from the wall. Two brackets and installation kits included.

    Metal Curtain Rod Brackets: What Makes Them Sturdy

    Plastic brackets can flex and crack around the screw holes. These are aluminum: the arm stays straight, and it doesn’t rust near a window where condensation collects in winter. The fixed 5-inch projection means both brackets hold the rod at the same depth, with nothing to adjust.

    Black Brackets: Where They Work

    Black brackets draw a crisp line against white blinds and a light wall. They match black rods, window frames and door hardware in modern, industrial and farmhouse rooms. At 5 inches out, the brackets show from the side too: against a dark curtain the arm disappears, against a light one it looks deliberate.

    Black metal curtain rod brackets and rod with white linen curtains over white blinds
    Black metal curtain rod brackets and rod with white linen curtains over white blinds
    Close-up of a black aluminum curtain rod bracket with a long fixed arm
    Close-up of a black aluminum curtain rod bracket with a long fixed arm

    Specifications and What’s in the Box

    5 inrod center

    Key specifications

    Bracket Projection
    5 in (fixed)
    Fits Rod Diameter
    3/4 in to 1 in rods
    Pack Size
    Set of 2
    Mounting Type
    Wall
    Material
    Aluminum
    Color
    Black

    Product details

    Product Type
    Curtain Rod Brackets
    Brand
    A Key Tech
    Model Number
    Slim CRB 28
    Item Weight
    0.23 kg (0.5 lb)
    UPC
    676525511408
    Amazon ASIN
    B0CY9RL2B7

    What’s in the box

    The curtain rod is not included. These brackets fit rods from 3/4 to 1 inch in diameter.

    How to Install Curtain Rod Brackets Over Blinds

    You need a drill, a screwdriver, a level and a tape measure. Hang the blinds first, so you check clearance against the real headrail.

    1. 1Mark the height
    2. 2Mark the width
    3. 3Set the anchors
    4. 4Screw the brackets to the wall
    5. 5Hang the rod
    1. left · right4–6 inabove
      Step 1 of 5

      Mark the height. Mark 4 to 6 inches above the window frame, clear of the headrail and valance.

    2. left · right4–6 inabove
      Step 2 of 5

      Mark the width. Mark each bracket 4 to 6 inches past the sides of the frame, level with each other.

    3. drywall3/16 in bitanchor
      Step 3 of 5

      Set the anchors. Screw into a stud where a mark lands on one. In drywall, use the anchors from the kit.

    4. 2 screws in the slots, level, then the 3rd
      Step 4 of 5

      Screw the brackets to the wall. Hold the base flat and tighten until snug. Don’t overtighten into drywall.

    5. Step 5 of 5

      Hang the rod. Slide the curtain on, set the rod in both brackets and check the gap to the blinds.

    Installing a black curtain rod bracket on the wall above window blinds
    Mount the brackets with the blinds already in place.

    Check that the blinds still work

    Tilt the slats and raise the blinds all the way. The wand and cord should move freely behind the curtain. If the curtain catches the wand, move the wand to the other end.

    5-Inch vs 6-Inch vs Ceiling Curtain Rod Brackets

    These bracketsOver Blinds Curtain Rod Brackets, 5 Inch Projection, Black Metal, Set of 2

    5 in Over Blinds

    Holds
    —
    Projection
    5 in
    Fits rods
    3/4 in to 1 in rods
    Mount
    Wall

    6 in Heavy Duty

    Holds
    25 lb per bracket
    Projection
    Up to 6 in
    Fits rods
    1 in
    Mount
    Wall

    Ceiling Mount

    Holds
    5 lb
    Projection
    3 in
    Fits rods
    3/4 in to 1 in rods
    Mount
    Ceiling or Wall

    Wholesale and Bulk Orders

    Trade pricing for interior designers, contractors, property managers, hospitality suppliers and stores.

    Install-ready: two brackets and installation kits included.

    Or call +1 267 986 1426, 9 AM–6 PM Eastern.

    • 30–50 unitsMinimum per finish: one master carton, by model
    • 20%+ offRetail price, better with volume
    • 1 business dayIn-stock orders ship from Pennsylvania
    • SamplesCheck the finish and build first

    FAQ

    Blinds, metal and weight: what buyers ask about these brackets.

    How far do curtain rod brackets need to stick out to clear blinds?

    Measure how far your blinds stick out and add 1 to 2 inches. These brackets hold the rod 5 inches out, so they clear blinds up to about 3.5 inches deep.

    Can curtain rod brackets attach to blinds?

    Not these. They screw into the wall above the window, not onto the headrail. A headrail isn’t built to carry a curtain, and the blinds keep working on their own.

    Are these curtain rod brackets metal or plastic?

    Metal. They’re aluminum, not plastic and not steel. Aluminum is lighter than steel and doesn’t rust.

    How much weight can these brackets hold?

    We don’t list a weight rating for this model. For heavy blackout or lined velvet curtains, choose the 6-inch heavy duty brackets, which list 25 lb per bracket.

    Where should I place curtain rod brackets over blinds?

    4 to 6 inches above the window frame and 4 to 6 inches past each side. Open curtains then stack beside the blinds instead of covering them.

    Can I buy these brackets in bulk?

    Yes. Trade pricing starts at one master carton per finish, 30 or 50 units depending on the model, with discounts from 20% off retail that grow with volume. In-stock orders ship from our Pennsylvania warehouse within one business day. See partner pricing or email [email protected].

    Other versions of this model

    Review