Curtain Rod Brackets for Window Trim, 5 Inch
Brushed Nickel · For 3/4–1 Inch Rods · Set of 2
A fixed 5-inch projection holds the rod far enough from the wall for the curtain to clear thick window trim and molding. The brushed nickel brackets fit rods from 3/4 to 1 inch. Two brackets and installation kits are in the box; the rod is sold separately.
$19.99
Buying for a project or a store? Trade pricing from one master carton
Clears window trim and molding
The rod sits 5 inches out from the wall, so the curtain hangs straight past a thick casing instead of bending around it.
Check your trimBrushed nickel finish
Aluminum brackets in a soft silver for gray, white and pastel rooms.
See the finish
Will 5-Inch Brackets Clear Your Window Trim?
Wide casing and crown-style head trim stick out from the wall. On short brackets, the curtain rests on the top corner of the trim and hangs at an angle. With 5 inches of projection, it clears the trim and falls straight.
Measure from the wall to the deepest point of the trim, usually the top of the head casing, and add 1 to 2 inches. If the total is 5 inches or less, these brackets clear it. The slider says blinds, but it works the same for trim.
| Trim sticks out | Needed with 1.5 in clearance | 5-inch brackets |
|---|---|---|
| 1 in | 2.5 in | Clear |
| 2 in | 3.5 in | Clear |
| 3 in | 4.5 in | Clear |
| 3.5 in | 5 in | Clear, no room to spare |
If blinds are mounted on the trim, measure to their front instead. For deeper trim, use the 6-inch heavy duty curtain rod brackets, which adjust up to 6 inches.
Fits your window?
5 in from the wall. Two brackets and installation kits included.
Mount above the trim, not on its edge
Each bracket needs flat wall behind its whole base. If the base overlaps the top edge of the casing, it rocks and sits crooked. How high to go above the trim is a style choice we cover on the modern curtain rod page.
1 Inch Curtain Rod Brackets: Check Your Rod
The brackets hold rods from 3/4 to 1 inch in diameter. A 1-1/4 inch or thicker decorative rod won’t fit.
The rod isn’t included: keep yours if it’s in that range.
Brushed Nickel: Where It Works
Brushed nickel is a soft silver that sits quietly on white trim and pale gray walls, with gray, ivory and pastel curtains. It matches brushed nickel door handles, hinges and faucets, and suits transitional and coastal rooms. Against white trim it keeps the window frame light, so the curtains stay the focus, not the hardware.
Specifications and What’s in the Box
Key specifications
- Bracket Projection
- 5 in (fixed)
- Fits Rod Diameter
- 3/4 in to 1 in rods
- Pack Size
- Set of 2
- Mounting Type
- Wall
- Material
- Aluminum
- Color
- Brushed Nickel
Product details
- Product Type
- Curtain Rod Brackets
- Brand
- A Key Tech
- Model Number
- Slim CRB 28
- Item Weight
- 0.25 kg (0.55 lb)
- UPC
- 676525830226
- Amazon ASIN
- B0CY9SG7CL
What’s in the box
How to Install Curtain Rod Brackets Above Window Trim
You need a drill, a screwdriver, a level, a tape measure and a pencil.
- Step 1 of 5
Mark the height. Mark above the top edge of the trim, so the whole base sits on flat wall.
- Step 2 of 5
Mark the width. Mark each bracket a few inches past the outside edges of the trim, so open curtains stack beside the casing. Check both marks with a level.
- Step 3 of 5
Find solid backing. Above most windows there’s a wooden header behind the drywall. Screw into it where you can. Elsewhere, use the anchors from the kit.
- Step 4 of 5
Screw the brackets to the wall. Hold the base flat and tighten until snug.
- Step 5 of 5
Hang the rod. Slide the curtain on, set the rod in both brackets and check that it clears the trim.
Don’t level off the trim
Trim in older homes is often slightly off level. Measure up from one side only, then carry the line across with a level, so the rod doesn’t copy the tilt.
5-Inch Trim Brackets vs 6-Inch vs Low-Profile
5 in for Trim
- Holds
- —
- Projection
- 5 in
- Fits rods
- 3/4 in to 1 in rods
- Mount
- Wall
6 in Adjustable
- Holds
- 25 lb per bracket
- Projection
- Up to 6 in
- Fits rods
- 1 in
- Mount
- Wall
Low Profile 3 in
- Holds
- 5 lb
- Projection
- 3 in
- Fits rods
- 3/4 in to 1 in rods
- Mount
- Ceiling or Wall
- Choose these 5-inch brackets for windows with thick trim or molding and a 3/4 to 1 inch rod.
- Choose the 6-inch brushed nickel curtain rod brackets for deeper trim, deep sills or heavy curtains. They adjust up to 6 inches and list 25 lb per bracket.
- Choose the low-profile brushed nickel brackets when the trim runs nearly to the ceiling. They mount on the ceiling or the wall, 3 inches deep. In black, see the ceiling curtain rod brackets.
- Prefer black? The black over blinds curtain rod brackets have the same 5-inch reach.
Wholesale and Bulk Orders
Trade pricing for interior designers, contractors, property managers, hospitality suppliers and stores.
Install-ready: two brackets and installation kits included.
Or call +1 267 986 1426, 9 AM–6 PM Eastern.
- 30–50 unitsMinimum per finish: one master carton, by model
- 20%+ offRetail price, better with volume
- 1 business dayIn-stock orders ship from Pennsylvania
- SamplesCheck the finish and build first
FAQ
Trim, molding and rod size: what buyers ask about these brackets.
Will 5-inch brackets clear window trim and crown molding?
Yes, if the trim sticks out 3.5 inches or less from the wall. Measure to its deepest point and add 1 to 2 inches of clearance. If you get more than 5 inches, use 6-inch brackets.
Do these brackets fit 1-1/4 inch curtain rods?
No. They fit rods from 3/4 to 1 inch in diameter. A 1-1/4 inch rod is too thick for them.
What does 5-inch projection mean?
It’s how far the bracket holds the rod out from the wall. Here it’s fixed at 5 inches, so there’s nothing to adjust.
How far above the trim should the brackets go?
High enough that the whole base sits on flat wall above the top edge of the trim. Going higher makes the window look taller.
Will the brushed nickel match my curtain rod?
It depends on the rod. Brushed nickel varies a little between brands, from cooler to warmer silver. Compare the brackets with your rod in daylight before you install them.
Can I buy these brackets in bulk?
Yes. Trade pricing starts at one master carton per finish, 30 or 50 units depending on the model, with discounts from 20% off retail that grow with volume. In-stock orders ship from our Pennsylvania warehouse within one business day. See partner pricing or email [email protected].
