Bedroom Curtain Rod, 48–84 Inch
Brushed Nickel · Wall Mount, 5 in Projection
A brushed nickel curtain rod for bedroom windows. It adjusts from 48 to 84 inches, sits 5 inches from the wall and holds up to 20 lb of curtains with all three brackets, including the center one.
Original price was: $49.99.$44.99Current price is: $44.99.
Buying for a project or a store? Trade pricing from 6 units
Three brackets for a level line
The center bracket holds up the middle, so bedroom curtains up to 20 lb don’t dip over the window.
See the weight limitRoom for a shade behind the curtain
The rod sits 5 inches from the wall, so a shade or blinds inside the frame fit behind the fabric.
Check the clearanceSized for bedroom windows
At 48 to 84 inches, it suits most single bedroom windows up to 76 inches wide.
Size your rod
Sizing a Curtain Rod for Bedroom Windows
In a bedroom, the rod’s width decides how much light gets in around the curtains. When closed panels end right at the frame, morning light comes through at the sides. Let the rod run past the frame, so closed curtains overlap the wall on both sides.
Size table: window width to rod length
| Window frame width | Extra on each side | Set the rod to |
|---|---|---|
| 30 in | 9 in | 48 in |
| 40 in | 6 in | 52 in |
| 48 in | 6 in | 60 in |
| 60 in | 8 in | 76 in |
| 70 in | 7 in | 84 in |
| 76 in | 4 in | 84 in |
The shortest setting is 48 inches, so on a small window the rod simply runs wider, which helps keep light out. The longest is 84 inches, enough for a 76-inch frame. A wider bedroom window needs a longer rod.
Two windows in one bedroom
Use one rod per window and hang both at the same height, measured from a level line rather than from the ceiling. If the windows differ in width, set each rod to its own window, but keep the same extra on each side. The room then looks even when the curtains are closed.
How High to Hang a Bedroom Curtain Rod
A common starting point is 4 to 6 inches above the window frame. In a bedroom, it pays to go a little higher for two reasons. A rod above the frame lets the closed curtains cover the gap at the top, where light leaks in first in the morning. And in rooms with 8-foot ceilings, a higher rod makes the window and the room feel taller.
Check what sits under the window before you mark the height. A headboard, a nightstand or a dresser in front of the window can stop the panels from closing or make them bunch. Measure the curtain length from the rod: floor-length panels should clear the floor or just touch it, and shorter ones should end above the furniture.
Light, Shades and the 5-Inch Projection
Many bedrooms get two layers: a shade or blinds inside the window frame and curtains on a rod in front. The brackets on this rod have a fixed length and hold it 5 inches from the wall. To check your shade, measure from the wall to its front edge and add 1.5 inches of clearance. A total of 5 inches or less means the curtains slide in front of the shade without touching it.
The projection doesn’t adjust. For outside-mount blinds or a deep sill, look at a rod with brackets that extend further, such as the heavy duty curtain rod, which reaches 6 inches.
Blackout curtains on a 20 lb rod
Blackout panels for a single bedroom window can hang on this rod as long as the pair, with rings and any liner, weighs under 20 lb. Thick thermal drapes and lined velvet can weigh more. For those, choose the heavy duty curtain rod, rated for 40 lb. In brushed nickel, it’s the heavy duty curtain rod for sliding glass doors.
Fits your window?
20 lb · 48–84 in · 5 in from the wall. Three brackets and installation kits included.
How Much Weight the Rod Carries
The limit is 20 lb. With two end brackets only, the middle of a rod is where it gives way first. The third bracket supports that point. Try both setups below with your curtain weight.
Illustration, not to scale.
The center bracket also decides how the curtains hang. Rings and grommets can’t pass it, so the rod takes one panel on each side. For a bedroom, that’s the usual setup: a pair that meets in the middle when closed.
Brushed Nickel for Bedrooms and Modern Farmhouse Rooms
Brushed nickel is a soft, satin silver. It doesn’t shine like chrome, so it stays calm in a room you want to rest in. It goes well with gray, sage, blush, blue-gray and white curtains, and it matches brushed nickel lamps, door knobs, ceiling fans and drawer pulls.
In a modern farmhouse bedroom, with shiplap, white oak and cream bedding, brushed nickel looks lighter than black. It reads as part of the wall rather than a dark outline. The same holds in a farmhouse living room with pale walls and wood beams. The fine brushed texture also hides dust and fingerprints better than a polished finish.
Flat ends, round bases
The rod finishes with flat cylindrical end caps, not decorative finials. Each bracket mounts on a round disc and holds the rod in an open cradle on a thin arm. In a bedroom with simple furniture, that keeps the hardware from looking fussy.
Prefer black? This is the same rod as the modern curtain rod in matte black, with the same length, brackets and 20 lb rating. Only the finish differs.
Specifications and What’s in the Box
Key specifications
- Rod Length
- 48–84 in (telescopic)
- Bracket Projection
- 5 in (fixed)
- Weight Capacity
- 20 lb
- Mounting Type
- Wall
- Material
- Aluminum
- Color
- Brushed Nickel
Product details
- Product Type
- Curtain Rod
- Brand
- A Key Tech
- Model Number
- BN4884
- UPC
- 676525620438
- Amazon ASIN
- B0D98G5447
What’s in the box
- 1 telescopic rod that adjusts from 48 to 84 inches
- 3 fixed-length brackets, including the center support
- 2 installation kits
Installing the Rod Above a Bedroom Window
Before you drill
Mark from the top of the window trim and check every mark with a level. Ceilings in older homes are often off by a fraction of an inch across a wall, and a rod measured from the ceiling ends up crooked. If a bed stands under the window, move it out first so you can work from a stable step stool.
- Step 1 of 6
Mark the height. Mark the left and right bracket positions at the same height above the frame.
- Step 2 of 6
Mark the middle. Mark the center bracket halfway between them.
- Step 3 of 6
Prepare the holes. Over a stud, drill a pilot hole. In plain drywall, set the anchors from the installation kit.
- Step 4 of 6
Fix the brackets. Screw all three brackets to the wall and check them with a level.
- Step 5 of 6
Add the curtains. Set the rod to length and slide on the panels: one for the left side of the center bracket, one for the right.
- Step 6 of 6
Place the rod. Lay it in the three cradles with the end caps outside the end brackets.
Plaster walls need toggle bolts rather than drywall anchors. Buy them separately.
Bedroom Rod vs Heavy Duty vs Double Ceiling Rod
Bedroom (Modern)
- Holds
- 20 lb
- Length
- 48–84 in
- Projection
- 5 in
- Mount
- Wall
Heavy Duty
- Holds
- 40 lb
- Length
- 48–84 in
- Projection
- Up to 6 in
- Mount
- Wall
Double Ceiling
- Holds
- 20 lb
- Length
- 48–84 in
- Projection
- Ceiling mount
- Mount
- Ceiling
- Choose this rod for bedroom curtains under 20 lb and a soft brushed nickel finish.
- Choose the heavy duty curtain rod for heavy blackout or thermal drapes up to 40 lb, or blinds that stick out more than 3.5 inches.
- Choose the double ceiling curtain rod to layer sheers in front of blackout curtains.
Wholesale and Bulk Orders
Trade pricing for interior designers, contractors, property managers, hospitality suppliers and stores.
Install-ready: three brackets and installation kits included.
Or call +1 267 986 1426, 9 AM–6 PM Eastern.
- 6 unitsMinimum per finish: one master carton of rods
- 20%+ offRetail price, better with volume
- 1 business dayIn-stock orders ship from Pennsylvania
- SamplesCheck the finish and build first
FAQ
Height, finish, blackout curtains and shades in a bedroom.
How high should I hang curtains in a bedroom?
Start 4 to 6 inches above the window frame. Go higher with tall ceilings or if you want the window to look taller. Keep the rod above the frame so the closed curtains cover the top gap, and check that furniture under the window doesn’t block the panels.
Brushed nickel or black: which is better for a bedroom?
Brushed nickel suits a calm, light bedroom with gray, sage, blush or white curtains and other nickel fixtures. Black works as a sharp outline against white walls and next to black lamps or bed frames. Match the metal you already have in the room. This rod also comes in black: the modern curtain rod in matte black.
Can I use blackout curtains on this rod?
Yes, if the pair weighs under 20 lb together with rings and liner. That covers many blackout panels for one bedroom window. Heavy thermal or lined velvet drapes can weigh more. Weigh them first, and use a rod rated for 40 lb if they go over.
Will a shade or blinds fit behind the curtains?
Yes, if the shade sticks out no more than 3.5 inches from the wall. The rod sits 5 inches out, and the curtain needs about 1.5 inches of clearance. Shades and blinds mounted inside the window frame usually fit.
Does this rod suit a modern farmhouse bedroom?
Yes. The flat end caps and plain round brackets fit the simple lines of modern farmhouse, and brushed nickel sits well with shiplap, white oak and cream fabrics.
Do I need all three brackets on a bedroom window?
Yes, install all three. The 20 lb rating counts on the center bracket. It also divides the rod so each panel opens to its own side.
Can I buy this rod in bulk?
Yes. Trade pricing starts at one master carton of 6 rods per finish, with discounts from 20% off retail that grow with volume. In-stock orders ship from our Pennsylvania warehouse within one business day. See partner pricing or email [email protected].
