Curtain Rod for Sliding Glass Doors, 48–84 Inch
Brushed Nickel · For Patio Doors & Vertical Blinds
Fits sliding glass and patio doors: the rod adjusts from 48 to 84 inches. The brackets reach up to 6 inches from the wall, so curtains can hang in front of most vertical blinds. Holds up to 40 lb with all three brackets installed.
Original price was: $49.99.$44.99Current price is: $44.99.
Buying for a project or a store? Trade pricing from 6 units
Sized for 60- and 72-inch patio doors
The rod adjusts from 48 to 84 inches, so it spans door frames up to 76 inches wide with room for the curtains on each side.
Find your lengthHangs curtains in front of vertical blinds
The brackets reach up to 6 inches from the wall, so the curtain clears blinds that stick out less than that.
Measure your blindsHolds 40 lb, opens from the middle
A center bracket carries the middle of the span. One panel opens to each side, so the door slides freely.
How it opens
What Size Curtain Rod for a Sliding Glass Door?
Sliding glass doors in the US usually come 60, 72 or 96 inches wide. Measure your door frame from the outer edge of the trim on one side to the outer edge on the other. The trim often makes the frame a few inches wider than the door itself, so measure your own door. Then add room on each side, so the open curtains stack on the wall and not in front of the glass.
Rod length for your patio door
Size table: window width to rod length
| Door frame width | Extra on each side | Set the rod to |
|---|---|---|
| 60 in | 6 in | 72 in |
| 64 in | 10 in | 84 in |
| 68 in | 8 in | 84 in |
| 72 in | 6 in | 84 in |
| 76 in | 4 in | 84 in |
This rod tops out at 84 inches. A 60-inch door gets plenty of wall on each side. A 72-inch door gets about 6 inches per side. An 8-foot (96-inch) slider is too wide for this rod.
Leave room for the stack-back
Stack-back is the width your curtains take up when they’re fully open. On a window, a few inches of fabric over the glass don’t matter. On a patio door, the stack sits in your path and can cover the door handle.
Thick thermal panels stack wider than sheers. On a 72-inch door, where the rod gives you about 6 inches per side, expect the open panels to cover the edge of the glass. Tiebacks or holdbacks pull them clear of the handle. On a 60-inch door, set the rod to 84 inches and each panel gets 12 inches of wall to stack on.
How high to mount it over the door
Mount the brackets 4 to 6 inches above the top of the door trim. Then hem the curtains so they just clear the floor. Fabric that drags on the floor can catch in the door track when you slide the door.
French patio doors that swing in
If your patio doors swing into the room, the open doors press against the curtain stack. Set the rod as wide as your wall and the 84-inch limit allow, and tie the panels back before you open the doors. The rod sits above the trim, so the doors swing under it.
Curtain Rod Over Vertical Blinds: What Fits
Many sliding glass doors already have vertical blinds. You can keep them and hang curtains in front, as long as the curtain clears the deepest part of the blinds. Here’s how to check:
- Turn the vanes open, so they stand straight out from the glass. That’s when they stick out the farthest.
- Measure from the wall to the front of the deepest part: the open vanes, the headrail or the valance.
- Add 1 to 2 inches so the curtain doesn’t brush the blinds.
- If the total is 6 inches or less, this rod fits.
What fits, and what doesn’t
The brackets adjust up to 6 inches from the wall to the rod center. Blinds whose deepest point, plus clearance, stays within that fit. You set the depth once and lock it with the hex key.
Blinds that stick out farther don’t fit, for example blinds on extension brackets or with a deep valance. The brackets don’t go past 6 inches.
The rod mounts to the wall on its own brackets. It doesn’t attach to the blinds’ headrail.
If your blinds are deeper than 6 inches and the top of the door sits close to the ceiling, a ceiling mount solves it, because ceiling brackets can go any distance from the wall. The double curtain rod for sliding glass doors mounts on the ceiling, also in brushed nickel.
Fits your window?
40 lb · 48–84 in · up to 6 in from the wall. Three brackets, anchors and screws included.
A Heavy Duty Rod for Sliding Glass Doors
A patio door is usually the widest opening in the room, and its curtains are often the heaviest. On an 84-inch span with only two brackets, the middle of a rod bows. That’s why this heavy duty curtain rod for sliding glass doors comes with a third bracket for the center. Choose two or three brackets below and add your curtain weight to see the difference.
Illustration, not to scale.
The panels open from the middle
The center bracket splits the rod into two halves. Hang one panel on each side of it. Rings and grommets slide along the rod and over the smooth joint between the two sections, but they can’t pass the center bracket. So each panel opens to its own side, and you walk through the middle of the door.
Want one panel that pulls all the way to one side? This rod isn’t built for that. A one-way draw needs a rod without a center bracket.
Thermal curtains for a cold glass door
A wall of glass loses heat in winter and lets in hard afternoon sun in summer. At night, anyone outside can see in. Thick thermal or blackout curtains solve all three, and that makes them heavy. This rod holds up to 40 lb with all three brackets installed. Count the panels, rings, clips and any liner together. If the total stays under 40 lb, the rod carries it.
Same rod as the black heavy duty curtain rod
This is the same rod as our heavy duty curtain rod in matte black. It has the same 40 lb rating, the same three aluminum brackets and the same 6-inch reach. Only the finish differs. If you’re hanging blackout curtains or heavy drapes on a window and want black hardware, start there.
Brushed Nickel for Patio Doors
Brushed nickel is a soft satin silver. It matches the nickel and satin chrome handles that come on many patio doors, silver aluminum door frames, and nickel lamps and cabinet pulls in the same room. The brushed texture gives a low sheen, not a mirror shine.
It suits transitional rooms, where gray and greige walls mix classic and modern furniture. It also suits coastal rooms, with white walls, light wood and linen. Pair it with gray, ivory, white, pale blue or sage curtains.
If most of the metal in the room is black, such as black window frames or black light fixtures, the matte black version will look more at home.
Specifications and What’s in the Box
Key specifications
- Rod Length
- 48–84 in (telescopic)
- Bracket Projection
- Up to 6 in (adjustable)
- Weight Capacity
- 40 lb
- Mounting Type
- Wall
- Material
- Aluminum
- Color
- Brushed Nickel
Product details
- Product Type
- Curtain Rod
- Brand
- A Key Tech
What’s in the box
- 2 telescoping rod sections that adjust from 48 to 84 inches
- 3 adjustable brackets with mounting plates, including the center support
- 2 ball finials
- 9 screws, 9 drywall anchors and 9 concrete and brick anchors
- 1 hex key
- Installation manual
How to Install a Curtain Rod Over a Sliding Glass Door
Each bracket screws onto a round mounting plate, and the plate goes on the wall. Above a patio door there’s usually a header, a solid wood beam over the opening, so the screws often bite into wood there. Plan 20 to 30 minutes. You need a drill with a 3/16-inch bit, a Phillips screwdriver, a level, a tape measure and a pencil. The hex key comes in the box.
- 1Mark the end brackets
- 2Mark the center bracket
- 3Mark the screw holes
- 4Prepare the holes
- 5Fix the mounting plates
- 6Attach the brackets and set the depth
- 7Hang the rod
- Step 1 of 7
Mark the end brackets. Center the rod over the door. Mark the left and right brackets at the same height, 4 to 6 inches above the door trim. Check with the level.
- Step 2 of 7
Mark the center bracket. Measure halfway between the two end marks. That’s where the two panels will meet.
- Step 3 of 7
Mark the screw holes. Hold each mounting plate in place and mark its three holes.
- Step 4 of 7
Prepare the holes. Where the screws hit the wood header or a stud, you don’t need anchors. In drywall, screw the drywall anchors in by hand and don’t overtighten them. In concrete or brick, drill 3/16-inch holes and tap in the plastic anchors. For old plaster, use toggle bolts. They’re not in the box.
- Step 5 of 7
Fix the mounting plates. Drive two screws through the wide slots, level the plate, then tighten both and add the third screw.
- Step 6 of 7
Attach the brackets and set the depth. Screw each bracket onto its plate. Slide the hook out to the depth you measured over the blinds and lock it with the hex key. Set all three to the same depth.
- Step 7 of 7
Hang the rod. Extend it to length, put one panel on each side of the center bracket, set the rod in the hooks and lock it with the hex key.
Set the depth before the rod goes up
Measure over the blinds first, then set all three brackets to that depth before you hang anything. If one bracket sits deeper than the others, the rod won’t run straight across the door.
Heavy Duty vs Double Ceiling vs Modern Curtain Rod
Heavy Duty
- Holds
- 40 lb
- Length
- 48–84 in
- Projection
- Up to 6 in
- Mount
- Wall
Double Ceiling
- Holds
- 20 lb
- Length
- 48–84 in
- Projection
- Ceiling mount
- Mount
- Ceiling
Modern
- Holds
- 20 lb
- Length
- 48–84 in
- Projection
- 5 in
- Mount
- Wall
- Choose this rod for sliding glass and patio doors, vertical blinds and thermal curtains up to 40 lb.
- Choose the double curtain rod for sliding glass doors to layer sheers behind heavier curtains from the ceiling. It holds up to 20 lb.
- Choose the brushed nickel bedroom curtain rod for lighter bedroom curtains, up to 20 lb, on fixed 5-inch brackets.
- Prefer black hardware? The heavy duty curtain rod in matte black is this same rod.
Wholesale and Bulk Orders
Trade pricing for interior designers, contractors, property managers, hospitality suppliers and stores.
Install-ready: three brackets, anchors and screws included.
Or call +1 267 986 1426, 9 AM–6 PM Eastern.
- 6 unitsMinimum per finish: one master carton of rods
- 20%+ offRetail price, better with volume
- 1 business dayIn-stock orders ship from Pennsylvania
- SamplesCheck the finish and build first
FAQ
Door sizes, vertical blinds and how the panels open: the questions buyers ask most.
What size curtain rod do I need for a sliding glass door?
Measure the door frame across the outside of the trim. Then add at least 4 inches on each side, more if your wall allows it, so the open curtains stack off the glass. For a 60-inch door, set this rod to 72 to 84 inches. For a 72-inch door, set it to 84 inches. A 96-inch door needs a longer rod than this one.
Will this curtain rod clear vertical blinds?
Yes, if the deepest part of the blinds plus 1 to 2 inches of clearance is 6 inches or less from the wall. Turn the vanes open before you measure, because that’s when they stick out the most. If your blinds go deeper than that, this rod won’t clear them.
How do I hang a curtain rod over a sliding glass door?
Mount the end brackets 4 to 6 inches above the door trim, then put the center bracket halfway between them. Screw into the header or studs where you can and use the included anchors elsewhere. Set the bracket depth to clear your blinds, then hang one panel on each side of the center bracket.
Can I get a curtain rod for a sliding glass door without a center bracket?
Not with this rod. The 40 lb rating applies with all three brackets installed, and the center bracket is part of the design. If you want one panel that draws all the way to one side, look for a rod made without a center support, such as a traverse rod.
What kind of curtain rod is best for a sliding glass door?
Look for a rod that runs a few inches past the frame on each side, brackets deep enough for your blinds and a center support if the curtains are heavy. A wall-mounted rod with adjustable brackets suits most doors. A ceiling-mounted rod suits doors that reach almost to the ceiling. This one is wall mounted: 48 to 84 inches, brackets up to 6 inches deep and a 40 lb rating.
Is this the same rod as the black heavy duty curtain rod?
Yes. The rod, the three brackets, the 40 lb rating and the box contents are the same. Only the finish differs: brushed nickel here, matte black on the other.
Can I buy this rod in bulk?
Yes. Trade pricing starts at one master carton of 6 rods per finish, with discounts from 20% off retail that grow with volume. In-stock orders ship from our Pennsylvania warehouse within one business day. See partner pricing or email [email protected].
