Skip to main content

Magnetic Curtain Rod Brackets

Black · Set of 2 · Adjustable 3.5–5 in

Two black steel brackets for a 1-inch curtain rod. A magnetic cover snaps over each wall plate and hides the screws, and the arm adjusts from 3.5 to 5 inches out from the wall.

3.5–5 infrom the wall
Set of 2brackets
1 inrod diameter
Wallmount
All specifications
Color:BlackBrushed Nickel
Pack:2 brackets3 brackets

$14.99

Buying for a project or a store? Trade pricing from one master carton

What is IN THE BOX

Black magnetic curtain rod bracket on a white wall with the screws hidden under the cover
The magnetic cover hides the wall screws
  • No screw heads on the wall

    A magnetic cover snaps over each wall plate, so the part you see is one smooth black piece.

    How it works
  • Adjusts from 3.5 to 5 inches

    Slide the arm to set how far the rod sits from the wall, then lock it with its screws.

    Set the depth
  • Made for 1-inch rods

    The open cradle takes a standard 1-inch rod. The brackets are alloy steel.

    See specs

How Magnetic Curtain Rod Brackets Work

These magnetic curtain rod brackets go up like any bracket, with screws through the wall plate. Then you press a cover onto the plate, a magnet holds it there, and the screws are gone from view. To reach them again, pull the cover off by hand.

Hand snapping the magnetic cover onto a black curtain rod bracket wall plate
The cover goes on after the screws are tight.

The cover goes on last

Screw the plate to the wall, check that it’s level, then snap the cover on. No glue, no clip.

What the cover doesn’t change

The cover is about looks, not strength. What holds the rod is the plate, the screws and what they go into: a stud, a solid anchor or masonry. No weight rating is published for these brackets. For heavy blackout drapes, look at our heavy duty curtain rod brackets, rated 25 lb per bracket.

Set the Projection: 3.5 to 5 Inches

Projection is how far the rod sits from the wall. Loosen the screws on top of the arm, slide it in or out, and tighten them again. At 3.5 inches the curtain hangs close to the wall. At 5 inches it clears window trim or a slim blind. Move the slider to check your window.

WALL

Need the rod closer than 3.5 inches? The ceiling curtain rod brackets sit 3 inches out and mount on the ceiling or the wall. Need more than 5 inches? Our 6-inch heavy duty brackets reach further. For horizontal blinds, the over blinds curtain rod brackets have a fixed 5-inch arm.

Fits your window?

3.5–5 in from the wall. Two brackets with magnetic covers included.

Black Finish: Where It Works

With the cover on, the whole bracket reads as one black shape: plate, arm and cradle. Nothing silver catches the light. That suits a black rod over white or cream walls, black window frames and black light fixtures. White, linen and cream curtains look sharp against it, and so do charcoal and navy.

Black 1 inch curtain rod on two magnetic brackets above a living room window
Black 1 inch curtain rod on two magnetic brackets above a living room window
Adjusting the arm of a black curtain rod bracket between 3.5 and 5 inches
Adjusting the arm of a black curtain rod bracket between 3.5 and 5 inches

Specifications and What’s in the Box

3.5–5 inrod center

Key specifications

Bracket Projection
3.5–5 in (adjustable)
Fits Rod Diameter
1 in rods
Pack Size
Set of 2
Mounting Type
Wall
Material
Alloy Steel
Color
Black

Product details

Product Type
Curtain Rod Brackets
Brand
A Key Tech
Model Number
MCCRB 3-5
Amazon ASIN
B0FPRL4NL8

Two brackets for one standard window

One bracket for each end of the rod: the usual setup for a single window. If the middle of your rod needs support, the extendable curtain rod brackets in a set of 3 add a matching center bracket.

What’s in the box

How to Install Magnetic Curtain Rod Brackets

You need a drill, a screwdriver, a level, a tape measure and a pencil.

  1. 1Set the projection
  2. 2Mark the bracket positions
  3. 3Mark and drill the holes
  4. 4Screw the plate to the wall
  5. 5Snap on the cover
  6. 6Hang the rod
  1. slide to set projectionhex key
    Step 1 of 6

    Set the projection. Loosen the screws on the arm, slide it to the depth you need and tighten them. Set both brackets the same.

  2. left · right4–6 inabove
    Step 2 of 6

    Mark the bracket positions. Mark both brackets at the same height above the frame and the same distance past each side of it.

  3. mark 3 holes
    Step 3 of 6

    Mark and drill the holes. Hold the wall plate on the mark, mark its holes and drill. In drywall, use anchors unless you hit a stud.

  4. 2 screws in the slots, level, then the 3rd
    Step 4 of 6

    Screw the plate to the wall. Level the bracket and tighten the screws.

  5. snap the magnetic cover over the screws
    Step 5 of 6

    Snap on the cover. Press the magnetic cover onto the wall plate over the screws.

  6. Step 6 of 6

    Hang the rod. Slide the curtain onto the rod and set the rod into both cradles.

Magnetic vs 6-Inch vs 5-Inch Curtain Rod Brackets

These bracketsMagnetic Curtain Rod Brackets, Adjustable 3.5–5 Inch, Black, Set of 2

Magnetic Cover

Holds
—
Projection
3.5–5 in
Fits rods
1 in rods
Mount
Wall

6-Inch Heavy Duty

Holds
25 lb per bracket
Projection
Up to 6 in
Fits rods
1 in
Mount
Wall

5-Inch Over Blinds

Holds
—
Projection
5 in
Fits rods
3/4 in to 1 in rods
Mount
Wall
  • Choose these magnetic brackets when a clean wall plate with no visible screws matters and 3.5 to 5 inches of depth is enough.
  • Choose the 6-inch heavy duty brackets for heavy drapes or a deep sill: they have a 25 lb per bracket rating.
  • Choose the 5-inch over blinds brackets when you hang curtains over horizontal blinds and want a fixed depth.

Same bracket, other versions: a set of 3 for wide windows, decorative curtain rod brackets in brushed nickel and hidden curtain rod brackets for a wide window.

Wholesale and Bulk Orders

Trade pricing for interior designers, contractors, property managers, hospitality suppliers and stores.

Or call +1 267 986 1426, 9 AM–6 PM Eastern.

  • 30–50 unitsMinimum per finish: one master carton, by model
  • 20%+ offRetail price, better with volume
  • 1 business dayIn-stock orders ship from Pennsylvania
  • SamplesCheck the finish and build first

FAQ

The magnetic cover, the depth adjustment and taking the rod down.

How does the magnetic cover work?

The cover sits over the wall plate and a magnet holds it there. You screw the plate to the wall first, then press the cover on, and the screws are hidden. To reach the screws later, pull the cover off by hand. No tools needed.

What’s the difference between magnetic and regular curtain rod brackets?

Both mount with screws through a plate. A regular bracket leaves the screw heads visible; a magnetic one covers them with a snap-on piece. The cover changes the look, not the holding strength.

Do I need to take the cover off to change the projection?

No. The depth adjustment is on the arm, not under the cover. Loosen the screws on top of the arm, slide it between 3.5 and 5 inches and tighten them again. The cover stays on the wall plate the whole time.

Can I take the rod down without removing the brackets?

Yes. The cradle is open on top, so the rod lifts out and the brackets stay on the wall. That makes it easy to swap or wash curtains.

Can I buy these brackets in bulk?

Yes. Trade pricing starts at one master carton per finish, 30 or 50 units depending on the model, with discounts from 20% off retail that grow with volume. In-stock orders ship from our Pennsylvania warehouse within one business day. See partner pricing or email [email protected].

Review